By default, the Binance app keeps pulling live prices, push notifications, and background refresh data from the Binance Official Site, and heavy users can burn through 200 to 500MB a day. The Official Binance App has several switches built in that you can turn off; if you're setting up a fresh install, follow the iOS installation guide first before adjusting data-saving settings. Here's a breakdown of where the data goes and how to trim it.
In a real-world test, leaving the Binance app running on an iPhone for 24 hours without touching it used about 220MB. Of that, the market-data WebSocket accounted for 60%, push notifications 15%, background refresh 12%, chart and image assets 8%, and everything else 5%.
The market-data WebSocket is the biggest chunk because the app keeps a live subscription running for every trading pair you've ever opened. Subscribing to one pair costs roughly 50-100KB per minute, so watching 10 pairs multiplies that by 10. Background refresh refers to iOS's system-level "Background App Refresh," which the Binance app uses to fetch the latest data; each fetch costs roughly 200KB to 1MB.
| Data Category | 24h Estimate | Where to Control It |
|---|---|---|
| Market-data WebSocket | ~130MB | In-app watchlist and candlestick charts |
| Push notifications | ~35MB | App notification settings |
| Background refresh | ~25MB | iOS system settings |
| Chart loading | ~15MB | In-app chart indicators |
| Avatar images | ~10MB | App caching policy |
| Announcements/news feed | ~5MB | App news feed settings |
If you're on a limited data plan or roaming internationally, Binance alone could cost you an extra several dollars, or even more, every month. Here's how to trim each of these categories.
Open the Binance app's "Markets" tab, swipe or long-press on any trading pair you're no longer watching, and choose "Remove from watchlist." Binance subscribes to live data for every pair in your watchlist by default, so the more you add, the more data it uses.
We recommend keeping your watchlist under 10 coins. Unless you're genuinely tracking dozens of coins at once, extra entries in your watchlist just keep the WebSocket connection busy in the background. Data usage drops immediately once you remove them.
The candlestick chart page subscribes to live data for whatever pair is currently open, and that subscription stops once you close the app or return to the home screen. A common mistake is putting the app in the background without fully closing it, which leaves the chart still refreshing. After you're done checking the market, swipe up from the bottom to fully close the app.
Go to "Me → Settings → Notifications and Reminders" and review each item. We recommend turning off these three categories:
First, "Market daily report," which pushes once a day but most users rarely actually read; second, "Marketing campaigns," which are frequent and unrelated to trading; third, "News-style push," which is purely informational.
Keep these three: account security (mandatory), order fills, and price alerts (based on thresholds you set). This way you don't miss anything important while still cutting down on notification data.
| Notification Type | Avg. Monthly Pushes | Monthly Data | Recommendation |
|---|---|---|---|
| Account security | 5-10 | ~0.1MB | Keep |
| Order fills | 50-200 | ~1MB | Keep |
| Price alerts | Custom | 0-5MB | As needed |
| Market daily report | 30 | ~3MB | Turn off |
| Marketing campaigns | 60-100 | ~8MB | Turn off |
| News feed | 100-300 | ~15MB | Turn off |
iOS's "Background App Refresh" lets Binance keep pulling data even while it's not open. If you don't rely on background notifications, you can turn it off.
Path: iOS Settings → General → Background App Refresh → Binance, and choose "Off" or "Wi-Fi Only." Choosing "Wi-Fi Only" is a good middle ground: background refresh keeps working over Wi-Fi and stops over cellular.
Note that turning off background refresh will delay some notifications — an order-fill alert, for instance, might go from arriving in 1 second to only showing up the next time you open the app. If you do high-frequency trading, we don't recommend turning this off. If you hold positions passively, the impact is minimal.
On Android, the equivalent setting is under "Settings → Apps → Binance → Battery → Background restrictions." Add Binance to your "unrestricted" or battery-saver whitelist.
Binance's candlestick charts load historical data — 200 candles by default. Opening multiple timeframes and indicators multiplies the number of requests. If data is tight, we recommend only opening the 4-hour and 1-day timeframes over Wi-Fi, and sticking to hourly or shorter timeframes over cellular.
The app's cache can be cleared periodically. "Me → Settings → Clear Cache" removes downloaded avatars, icons, and historical candlestick data. Since everything gets re-downloaded the next time you open the app, it's best to clear the cache while on Wi-Fi.
The Binance app itself is roughly 350MB, and with cache it can grow to 800MB-1.2GB. If your device is low on storage, clearing the cache once a month can free up 400-700MB.
Data costs a lot more on international roaming, so we recommend doing at least these three things. First, switch on "Data Saver Mode" (found under the app's Me → Settings, sometimes labeled "Low Data Mode" in some versions). Second, turn off non-essential push notifications. Third, turn off background refresh.
If you're only checking prices while roaming and not placing orders, the web version can replace the app entirely. Loading the Binance website in Safari only transfers data for the page you're currently viewing, and closing the tab stops all data usage — more efficient than the app's constantly running WebSocket connection.
If you run into restricted access to Binance in certain regions, stick to officially recommended access channels and avoid unauthorized mirrors or proxies, which can get your account flagged as abnormal and temporarily frozen.
Q: Does turning on "Data Saver Mode" on the Binance app slow down order execution?
There's a slight impact. Data Saver Mode reduces how often price updates push through (from roughly every 500 milliseconds to about every 2 seconds), and the delay between tapping to place an order and seeing the confirmation goes from about 0.5 seconds to about 1 second. Regular spot trading and holding positions won't feel a difference, but high-frequency futures trading might.
Q: Where can I see how much data the Binance app has used?
There's no usage tracker inside the app itself. On iOS, go to Settings → Cellular and scroll down to Binance to see this month's usage. On Android, check Settings → Connections → Data Usage → Binance.
Q: If I turn off Binance notifications, will I still get alerted about logins from unfamiliar devices?
Yes. Unfamiliar-device login alerts go out through both email and SMS, and app push notifications are just one additional channel. Even with app notifications fully disabled, the email alert will still arrive.
Q: What happens if iOS automatically closes the Binance app's background process?
iOS automatically closes background apps when memory is low, and the app just reloads the next time you open it. This doesn't affect account security, but you'll lose some real-time responsiveness. Consider adding Binance to "Focus Mode → Allowed Apps" to raise its priority.
Q: Can Binance work normally in iOS "Low Data Mode"?
Yes, but with some limitations. In Low Data Mode, iOS restricts certain background requests, so the Binance app's live price updates refresh less often and notifications may be delayed. Core functions like placing orders and checking your account are unaffected.
Q: Can my carrier tell I'm trading crypto based on the Binance app's data usage?
Binance app traffic runs over encrypted HTTPS and WebSocket connections, so your carrier can only see which server domains you're connecting to (the binance.com family of domains) and can't see what you're actually doing. Whether that gets flagged in any way depends on the specific network regulations in your country.