BabianGuru MANUAL

How to Set Take Profit and Stop Loss on Binance Futures? Mark Price vs Last Price Triggers Explained

Binance Futures take profit and stop loss can be ticked on the order panel or added to an open position. Trigger on Mark Price (index-based, spike-resistant, used for liquidation) or Last Price (latest trade, faster). Includes steps, a liquidation-price check, comparison tables and troubleshooting.

2026-10-30 36 min read BabianGuru Editorial Team

Take profit and stop loss on Binance Futures can be set on the futures order page of the Binance Official Site and the Official Binance App, and iPhone users can first follow the iOS Install Guide to get the app installed. The short answer: tick "TP/SL" on the order panel when opening a position, or tap "TP/SL" in the position list afterwards, then choose whether the trigger price type is "Mark Price" or "Last Price". Mark Price is more resistant to spikes, Last Price triggers faster, and beginners setting a stop loss should generally start with Mark Price.

Below we cover the conditional order types, the difference between the two prices, the full setup procedure, how a stop loss relates to the liquidation price, and the most common pitfalls. Exact menu names and options follow whatever the current Binance interface shows.

What Take Profit and Stop Loss Actually Are

Take profit and stop loss are two conditional orders with pre-set trigger prices: when the price reaches the take-profit level, the position is closed automatically to lock in profit, and when it reaches the stop-loss level, the position is closed automatically to cap the loss. Until the trigger price is reached, these orders do not enter the real order book, so they do not occupy a spot in the queue.

Binance Futures offers four common conditional order types. They differ in how the order executes once triggered:

Order type Action after trigger Guaranteed to fill? Fill price certainty Typical use
Stop Market Closes immediately at market price Almost always fills Low, slippage possible Getting out first in a fast market
Stop Limit Places a limit order at a set price Not guaranteed High Calm markets where the fill price matters
Take Profit Market Closes immediately at market price Almost always fills Low Banking the profit as soon as the target is hit
Take Profit Limit Places a limit order at a set price Not guaranteed High Filling close to a precise target price

The first job of a stop loss is to make sure the position actually gets closed, so stop losses more often use the market type, while take-profit orders are less urgent and can use the limit type to chase a better price. A detailed comparison of the two stop order styles is in the article on the difference between stop-limit and stop-market orders on Binance.

What Mark Price and Last Price Are

Last Price is the price of the most recent trade on a Binance futures pair, while Mark Price is the reference price Binance uses to calculate unrealized profit and loss and to trigger forced liquidation. Mark Price is typically derived from the spot index prices of several major exchanges plus an adjustment related to the funding basis.

Last Price is determined entirely by trades on the Binance futures order book itself. If someone sweeps the book with a large market order, or a thin-liquidity moment produces a sudden wick, Last Price can show a sharp spike within seconds. Mark Price references the index of several exchanges, so abnormal trades on a single order book affect it far less. The design goal is to reduce unreasonable liquidations caused by deliberate price pushes.

The core differences are summarized below:

Item Mark Price Last Price
Price source Multi-exchange index price plus basis adjustment Most recent trade on the Binance futures order book
Sensitivity to sudden wicks Low High
Relationship with liquidation Liquidation is judged by it Not used for liquidation
Relationship with the price shown on the order page May differ slightly from the traded price Matches the traded price on the book
Trigger speed for a stop loss Slightly slower, as the index must catch up Faster, triggers as soon as the book moves
Typical problem By the time it triggers, the book price may already be further away A wick hits the stop, then price snaps back

One key fact deserves its own line: forced liquidation on Binance Futures is triggered by Mark Price, not Last Price. A short wick on the order book may make Last Price look like it has "crossed the liquidation price", but as long as Mark Price has not reached it, the position remains open.

How to Choose the Trigger Price Type

Choosing between Mark Price and Last Price comes down to which is feared more: being stopped out by a fake move, or triggering too slowly. A regular stop loss for a beginner is better set on Mark Price, while very short-term orders that need the fastest reaction can use Last Price.

The following table gives reference choices for common scenarios:

Scenario Better trigger type Reason
Swing position with the stop below key support Mark Price Avoids being shaken out by a brief wick
Small-cap coin contract with thin liquidity Mark Price Small-cap order books are more prone to abnormal trades
Very short-term trade with a tight stop Last Price The exit must happen as soon as the book reaches the level
Stop placed right next to the liquidation price, no buffer Mark Price Matches the basis on which liquidation is judged
Take profit at a round-number level Either type Depends on whether speed or stability matters more

When Last Price is used as the stop-loss trigger, the trade-off is that a wick can trigger the order, and if the order is a market order, the fill price may land well away from the trigger price. When Mark Price is used, the trade-off is the opposite: in a genuinely fast drop, Mark Price can lag the order book by half a beat, and the final fill can still differ from the trigger price. Neither type guarantees the fill price; they simply trade off in different directions.

Full Setup Procedure

The following walkthrough uses a USDT-margined perpetual contract in the Binance App. The web version places menus in similar positions with a different layout, and the current Binance interface is always the reference.

Step 1: Confirm the Contract Type and Margin Mode

Open the futures page and confirm that the current pair is the USDT-margined or coin-margined contract you intend to trade, then check whether the margin mode is isolated or cross. The margin mode affects the liquidation price, which in turn decides where a stop loss should sit. The difference between the two modes is covered in the article on how Binance Futures margin works (isolated vs cross). Beginners should start with isolated margin and keep leverage low.

Step 2: Set TP/SL While Opening the Position

After entering the price and quantity in the order panel, tick "TP/SL" (shown in English as TP/SL), which expands two input groups: the take-profit price and the stop-loss price. After entering the prices, the trigger price type can usually be selected next to them, and an estimated profit or loss is displayed below.

For a long position, the take-profit price must be above the entry price and the stop-loss price below it; for a short position it is the reverse. A reversed entry will be rejected by the system or may trigger immediately. After checking the values, tap Buy/Long or Sell/Short, and the TP/SL orders are placed together with the position once it opens successfully.

Step 3: Add or Edit TP/SL on an Existing Position

If TP/SL was not set at the time of opening, find the position in the "Positions" list at the bottom of the page and tap the "TP/SL" button. In the window that appears, the take-profit trigger price and stop-loss trigger price can be entered separately, and the trigger price type can be set to Mark Price or Last Price.

The window usually also has a close-quantity option. Choosing the entire position closes everything when triggered, while entering only part of the quantity allows scaled take profits. To change an existing TP/SL, use the same entry point; the new price takes effect immediately after saving.

Step 4: Choose the Execution Method After Trigger

In the TP/SL window, or in the order type drop-down for conditional orders, choose whether the order executes at market price or at a limit price after being triggered. For a stop loss, the market type is generally the first choice because it makes sure the position can be closed; for take profit, the limit type may be chosen depending on conditions. If a limit type is chosen, a limit price must also be entered, with a reasonable gap kept between the limit price and the trigger price.

It is also advisable to tick "Reduce-Only". This option ensures that the conditional order can only reduce or close the existing position after it triggers, and will never open a new opposite position if the original position has already been closed.

Step 5: Confirm the Conditional Order in the Order List

Once set up, check the "Open Orders" or "Conditional Orders" tab at the bottom of the page: the trigger price, trigger type, direction and quantity should match what was intended. The position row also usually shows the TP/SL prices that were set. This step is easy to skip, yet it is the most direct way to catch a mistyped number.

If more size is added to the position later, or part of it is closed manually, check again that the TP/SL quantity still covers the whole position.

The Stop Loss Must Sit Before the Liquidation Price

A stop-loss price must be closer to the entry price than the liquidation price, otherwise the position is force-closed before the stop order has a chance to trigger. The liquidation price can be viewed in the position details, and it changes every time size is added, margin is adjusted or leverage is modified.

Here is a hypothetical example: a BTC perpetual long is opened at 60,000 USDT, with a stop-loss price of 58,800 USDT (2% below entry) and a take-profit price of 63,000 USDT (5% above entry). If the liquidation price at the current leverage sits around 54,000 USDT, there is still room between the stop and the liquidation price, so the stop order has a chance to fire first. If leverage is set very high, the liquidation price may end up closer than the stop price, which makes the stop effectively useless. These numbers are illustrations only; the actual liquidation price is whatever the Binance position page shows.

The check can be reduced to three things:

  1. Look at the liquidation price currently displayed on the position page.
  2. Confirm the stop trigger price sits between the entry price and the liquidation price, with a buffer.
  3. Keep the trigger price type consistent with the liquidation basis, that is, use Mark Price.

The liquidation mechanism and its formulas are explained in the article on what liquidation means on Binance Futures and which leverage gets liquidated fastest.

Common Pitfalls and How to Troubleshoot Them

Most problems with TP/SL fall into a few groups: prices entered on the wrong side, slippage after the trigger, leftover orders, and position size mismatches. Going through them one by one prevents most surprises.

Trigger price too close to the current price. Binance validates the relationship between the trigger price and the current price for conditional orders. If the trigger price already sits on the side that would fire immediately, the system shows an error or fills right away. When this message appears, move the trigger price further out in the sensible direction.

Price returns after a wick. With Last Price as the trigger, a wick lasting only a few seconds can fire the stop, after which price returns to where it was while the position is already closed. Switching to Mark Price lowers the odds of this, but does not remove them entirely.

Fill price far from the trigger. A stop-market order on a thin contract can slip significantly. Reducing the size of a single order and avoiding the window around major data releases can limit this effect.

Quantity mismatch after partial closes. After a manual reduction, a TP/SL that originally covered the whole position may exceed the remaining size. Enabling "Reduce-Only" prevents the excess from opening an opposite position, but a manual check is still recommended.

Position closed but conditional order still there. After closing a position manually, some types of conditional orders may not be cancelled automatically. Check "Open Orders" to confirm that no leftover order remains, otherwise a new position could be opened unexpectedly the next time price touches the level.

Forgetting to adjust the stop after changing leverage or margin. The liquidation price moves with leverage and margin, so a stop level that was once safe may no longer be.

Common TP/SL Combinations

Different holding periods and risk preferences call for different setups. The table below lists three common approaches as structural references only, not trading advice:

Approach Stop-loss setting Take-profit setting Suitable for
Fixed percentage A fixed percentage below the entry price A fixed percentage above the entry price Traders who use a uniform risk ratio
Key levels Just beyond key support or resistance Near the previous high or low Traders with clear technical-level judgment
Scaled take profit One stop shared by the whole position Several price levels, each closing part of the position Those who want to bank profit and still stay in the trade

Whichever approach is used, the stop distance should be set together with the leverage: the higher the leverage, the less room price has to move against the position, the closer the stop must be, and the smaller the position size should be.

Risk and Security Notes

Conditional orders are only an automation tool and do not remove trading risk. In extreme markets, price can jump past a trigger price, and the fill after the trigger can deviate significantly from the configured value. A few points deserve particular attention:

  • Binance Futures is a high-risk derivative product and the entire margin can be lost. The higher the leverage, the smaller the margin for error.
  • Take profit and stop loss are not a guarantee of capital protection, and a fill at the trigger price cannot be promised during violent swings.
  • If the network drops or the app misbehaves, conditional orders keep running on Binance's servers, but they cannot be edited manually, so this should be considered in advance.
  • Turn on 2FA and an anti-phishing code for the account so that positions cannot be tampered with after an account takeover.
  • Download the app only from official Binance channels, and use Binance's own Binance Verify tool to check links and emails before logging in.
  • BabianGuru is an independent third-party tutorial site with no affiliation to Binance. Users in mainland China should first understand and comply with the laws and regulations on cryptocurrency in their region.

FAQ

Q: Should Binance Futures take profit and stop loss use Mark Price or Last Price? A: For beginners, a stop loss is better set on Mark Price, since it references the index of several exchanges, is less likely to be triggered falsely by a sudden wick, and matches the basis on which liquidation is judged. For very short-term trades that need to exit as soon as the book reaches the level, Last Price can be used.

Q: Does Binance Futures liquidate on Mark Price or Last Price? A: Forced liquidation on Binance Futures is based on Mark Price. A brief spike in Last Price does not necessarily trigger liquidation.

Q: Is a stop loss guaranteed to fill at its trigger price? A: No. A stop-market order fills at whatever the order book offers at that moment, so slippage is possible in a fast market, while a stop-limit order may not fill at all if price never reaches the limit.

Q: Can TP/SL be added after the position is already open? A: Yes. Tap "TP/SL" in the position list at the bottom of the page, enter the trigger prices, choose the trigger price type and close quantity, and confirm. The same entry point can be used to change them later.

Q: Do the TP/SL orders need to be cancelled before closing the position manually? A: After a manual close, it is advisable to check "Open Orders" for leftover conditional orders and cancel them by hand, and to keep "Reduce-Only" on to lower the risk of opening an opposite position.

Q: Can a stop-loss price be set further away than the liquidation price? A: The number can technically be entered, but it is pointless. If the liquidation price is closer, the position is force-closed first and the stop order never gets the chance to trigger. The stop price should sit between the entry price and the liquidation price with a buffer.

Q: What if the TP/SL options in the app or web version do not match this article? A: Binance adjusts its interface from time to time, so option names and positions may differ from this description. The current Binance interface and the official Help Center are the authority.

When ready to try it in practice, open the Binance Official Site, log in, and run through the whole procedure on the futures page with a small position and low leverage first. Confirm that the trigger price type, the conditional order list and the liquidation price all look as expected before increasing size step by step.