How Do You Go Long or Short on Binance Futures? How Do You Close a Wrong Position?
Betting on a rise is called going Long, betting on a drop is called going Short. On the futures page, the green Buy button opens a long, the red Sell button opens a short. If you picked the wrong direction, just tap the opposite button to close it — the system automatically recognizes it as closing your existing position rather than opening a new one in the opposite direction.
Here's the bottom line: in futures trading, betting on a price rise is called "going Long," and betting on a drop is called "going Short." At the bottom of Binance's futures page, there's a green "Buy/Long" button and a red "Sell/Short" button. If you expect BTC to rise, tap the green button; if you expect it to fall, tap the red one. If you picked the wrong direction, simply tap the opposite button and your position closes immediately (the system automatically recognizes this as closing your existing position rather than opening a new one in the reverse direction). First open the Binance Official Site, Android users go through the Official Binance App, and iPhone users should check the iOS Install Guide.
Below we'll walk through the fundamentals — going long, going short, closing positions, and fixing mistakes — from start to finish.
What Going Long and Short Actually Means
On spot, you can only go long: you buy BTC, and you profit when it rises and lose when it falls.
On futures, you can go both long and short:
Going Long (Buy): you expect the price to rise, and you profit from the price difference.
Going Short (Sell): you expect the price to fall, and you profit from the price difference.
Shorting works by "borrowing" the asset and selling it, then "buying it back and returning it" once the price has dropped — the difference is your profit. Binance's futures system handles the borrowing process automatically; you just need to tap the Short button.
The Elements of the Binance Futures Interface
Open the futures trading page (using the USDT-margined perpetual BTC/USDT as an example) — here are the core elements:
Top of the screen: candlestick chart and order book
Middle of the screen: trading pair name, leverage setting, and margin mode
Bottom-left of the screen: order entry area
- Price input field (needed for limit orders)
- Quantity input field (by BTC amount or USDT value)
- Green "Buy/Long" button
- Red "Sell/Short" button
Bottom-right of the screen: positions and orders
- Position info
- Open orders
- Trade history
What beginners most often confuse is the button colors:
- Buy + Long = green = bullish
- Sell + Short = red = bearish
Steps to Open a Long Position
Step 1: Go to the futures trading page and select BTC/USDT.
Step 2: Set your leverage (3-5x for beginners).
Step 3: Choose your margin mode (isolated is recommended for beginners).
Step 4: Choose your order type (market / limit / take-profit-stop-loss).
Step 5: Enter the quantity. You can enter it in BTC amount, USDT value, or margin amount. Beginners will find USDT value or margin amount the most intuitive.
Step 6: Double-check the notional position value (shown on the page as "Cost" or "Margin").
Step 7: Tap the green "Buy/Long BTC" button.
Step 8: A confirmation box pops up — confirm it.
Step 9: The position now shows up in your "Position Info."
Steps to Open a Short Position
Almost identical to opening a long position — the only difference is that on the final step you tap the red "Sell/Short BTC" button.
Keep in mind:
- You don't need to hold BTC beforehand to short. The system automatically handles the "borrowing" process.
- Shorting on futures is completely different from selling on spot. Selling on spot means converting the BTC you hold into USDT; shorting on futures opens a reverse position that profits when price falls.
- Shorting requires margin and leverage and carries liquidation risk, just like going long.
How to Read Your Position Info
After opening a position, the "Position Info" section below shows:
- Trading pair (e.g., BTC/USDT)
- Position direction (long/short, shown in green/red)
- Size (how much BTC)
- Average entry price
- Mark price (current market price)
- Unrealized P&L (both dollar amount and percentage)
- Liquidation price
- Margin used
Note that "unrealized P&L" is calculated using the "mark price," which can differ slightly from the "latest trade price." Liquidation is also calculated using the mark price, to avoid an unfair liquidation triggered by a single-exchange price wick.
Two Ways to Close a Position
Closing a position means shutting it down and cashing out your P&L. There are two ways to do it.
Method One: Tap the close button directly
Find the position you want to close in "Position Info" — there's a "Market Close" button on the right side. Tapping it closes the position immediately at market price.
Method Two: Open a reverse order
If you're holding a BTC long, you can place a BTC short order of the same size, and the system recognizes it as either "close long + open short" or purely "close long" (depending on your settings).
In One-way Mode: opening a reverse order defaults to "closing" the position. For example, if you're holding 1 BTC long and open a 1 BTC short, your position goes to zero (the long is closed).
In Hedge Mode: opening a reverse order opens a brand-new position in the opposite direction, so you end up holding both a 1 BTC long and a 1 BTC short at once. You need to explicitly select "Close Long" or "Close Short" in the closing options.
One-way Mode is simpler for beginners.
Three Typical Closing Scenarios
Scenario One: Closing for profit
Price moves as expected, and you want to lock in your gains. Just tap Market Close.
Note: closing also incurs fees. With BNB fee discounts, closing a 1,000 USDT position costs 0.45 USDT.
Scenario Two: Closing on a stop-loss
Price moves against you and you accept the loss and exit. Manually tap Close, or let your pre-set stop-loss order trigger automatically.
Scenario Three: Picked the wrong direction
You just opened a position and realize you got the direction wrong. Immediately tap the reverse button to close it. The loss is mainly fees plus a small price difference.
How to Fix a Wrong Direction
A common beginner mistake: wanting to go long but accidentally tapping "Sell/Short."
The correct way to fix it:
Step 1: Check your position in "Position Info." If it shows a short position, confirm that you opened it by mistake.
Step 2: Tap "Market Close" on that position. This immediately closes the short position, and your loss is limited to the price spread plus fees (usually just a few USDT).
Step 3: Open a new position in the correct direction.
Wrong ways to handle it (don't do these):
Mistake one: Immediately opening another reverse order. In Hedge Mode, this ends up holding both a long and short position at once, wasting capital efficiency and paying funding costs on both sides.
Mistake two: Waiting for "the price to come back." If the direction was wrong to begin with, waiting won't make it right — the loss will just grow.
Mistake three: Convincing yourself the wrong position is fine. You meant to go long but ended up short, and you tell yourself "shorting works too, whatever." This kind of self-deception erodes your judgment.
Adding to and Reducing Positions
After opening a position, you can still add more margin or reduce your holding.
Adding to a position:
- Open another position in the same direction
- The system automatically merges it into a single position with a weighted average entry price
- Good for increasing exposure once a trend is confirmed
Reducing a position:
- Close part of your position (not all of it)
- For example, if you hold 1 BTC and close 0.5 BTC, you're left holding 0.5 BTC
- Good for taking profits in stages or managing risk
How to do it: place a new order in "reduce" mode, or adjust the quantity when using "Market Close" from your position info.
One-way Mode vs. Hedge Mode
Binance futures offers two position modes, which affect how going long and short work.
One-way Mode:
- You can only hold one direction of position per trading pair at a time
- If you're holding a long, placing a short order is treated as "closing the long"
- Simpler to operate — recommended for beginners
Hedge Mode:
- You can hold a long and a short position at the same time
- When placing an order, you must explicitly choose "Open Long / Close Long / Open Short / Close Short"
- Suited to hedging strategies
- Ties up more capital (requires double the margin)
To switch: go to "Futures Settings" → "Position Mode." You must close all positions before switching.
A Checklist Before You Place a Futures Order
Quickly check these before every order:
Item one: Is the trading pair correct? Don't mix up BTC/USDT and ETH/USDT.
Item two: Is the direction correct? Bullish means tap the green Long button, bearish means tap the red Short button.
Item three: Is the leverage reasonable? Beginners shouldn't exceed 10x.
Item four: Is the margin mode correct? Isolated margin is preferred.
Item five: Is the quantity correct? When entering a USDT amount, make sure you've calculated exactly how much margin it uses.
Item six: Have you decided on a stop-loss level? Place it immediately after opening the position.
Item seven: Is your account balance sufficient? Make sure margin is adequate and won't interfere with your other positions.
Building the habit of a 30-second checklist before every order avoids most beginner mistakes.
Things to Think About Before Closing a Position
Don't close on impulse. Ask yourself a few questions before every close:
Question one: Why am I closing this? (Locking in profit / stopping a loss / changing my view / fear)
Question two: Has my original thesis actually changed?
Question three: If I haven't hit my stop-loss yet, why am I closing early?
Question four: What am I planning to do after closing? (Wait and watch / reverse direction / switch coins)
Someone who closes out of "panic" will open their next position out of panic too. Writing one sentence explaining your reason every time you close a position dramatically improves your trading discipline.
| Reason for Closing | Is It Reasonable? |
|---|---|
| Price hit your take-profit level | Reasonable (executing the plan) |
| Price hit your stop-loss level | Reasonable (executing the plan) |
| Major news changed the fundamentals | Reasonable (re-evaluating) |
| Sudden panic | Not reasonable (emotion-driven) |
| Saw someone else selling | Not reasonable (following the crowd) |
| Felt like "close enough" | Not reasonable (unprofessional) |
FAQ
Q: Is going long the same thing as buying? A: On futures, "going long = buy to open," and "going short = sell to open." Note that "sell" has two meanings on futures: opening a short, or closing a long. Whether you currently hold a position tells you which one applies.
Q: Can I change direction after opening a position? A: Not directly. You need to close the position first and then open a new one in the opposite direction. There's a brief gap with no position, but the only real cost is double the fees.
Q: Can I cancel an order after placing it? A: Market orders fill almost instantly, so they can't be canceled; limit orders that haven't filled yet can be canceled.
Q: When should I use a market order versus a limit order? A: Use a market order when conditions are moving fast and your view is clear. Use a limit order when you're waiting for price to hit a support or resistance level. Beginners will find market orders simpler.
Q: Should I use a limit order when closing a position? A: Use a market order for an urgent stop-loss; use a limit order when targeting a specific price. You can also place conditional orders to pre-set your take-profit and stop-loss levels.
Q: How soon after opening a position can I close it? A: Anytime. There's no minimum holding period — in theory you could close it one second later.
Q: How is P&L from closing a position settled to my account? A: It's settled the instant you close. Profits are deducted from the counterparty and credited to your account; losses are deducted from your account and credited to the counterparty. USDT-margined contracts settle in USDT.
The core training for a beginner's first week is simply getting comfortable with the three basic actions: going long, going short, and closing a position. Do 50 rounds on the demo account first, then 50 more rounds with the smallest possible real-money size — once the muscle memory is there, you're ready to move on to more advanced strategies.